Small Conductor Cleaning Brush
Product Number: USCC-001

ENLARGE
Please contact your local Sales Rep or call the factory to place your order (828) 323-8914 We accept VISA / MC / AMEX.
Conductor size range: #4 minimum through 750 MCM maximum
C-clamp design

The Utility Solutions Small Conductor Cleaner offers optimum conductor cleaning for the utility serious about acheiving solid in-field grounding and jumpering connections. The clamp comes supplied with two sets of wire brushes. One set of brushes is designed to work on conductor sizes ranging from 250 MCM to 750 MCM. Another set of brushes is designed to work on conductor sizes ranging from #4 to 250 MCM. All wire brushes are 5" in length. Brushes can be changed without use of any tools.
The C-clamp design permits either hand held operation or shotgun operation and provides a full 360 degree conductor cleaning. In addition the operator can easily increase the brush aggressiveness on the conductor to remove even the most difficult oxide coating.

Catalog number USCC-002 is replacement brushes for 250 MCM - 750 MCM conductor size.
Catalog number USCC-003 is replacement brushes for #4 - 250 MCM conductor size.

Product weight: 2.5 lb.
Product dimension: 12" x 5" x 5"


related products

15 kV Jack Jumper

 Jack Jumper overhead cutout bypass jumper. Designed for use on all standard 15 kV rated cutouts. Rated for 100 Amp service. Exhibits a maximum stretch of 9 1/2". Product Number: USJJ-001

27 kV Jack Jumper

 Jack Jumper overhead cutout bypass jumper. Designed for use on all standard 27 kV rated cutouts. Rated for 100 Amp service. Exhibits a maximum stretch of 14 1/2". Product Number: USJJ-002

15 kV Loadbreak Jack Jumper

 JackJumper overhead cutout bypass jumper. Designed for use on ABB's 15 kV rated porcelain loadbreak cutouts (cutouts with elephant ears). Rated for 100 Amp service. Product Number: USJJ-004

38 kV Cutout & SMD-20 15 kV Jack Jumper

 Jack Jumper overhead cutout bypass jumper. Designed for use on all standard 38 kV rated cutouts and SMD-20 15 kV power fuses. Rated for 100 Amp service. Exhibits a maximum stretch of 19" Product Number: USJJ-005

SMD-20 38 kV Jack Jumper

 Jack Jumper overhead cutout bypass jumper. Designed for use on SMD-20 38 kV power fuses incorporating a "V" design. Rated for 100 Amp service. Exhibits a maximum stretch of 40". Product Number: USJJ-007

GRAB-IT Overhead Fuse Barrel Installation and Removal Tool

 Rated for 100 Amp overhead fuse barrels. Provides easy and safe removal and installation of overhead fuse barrels. Mounts on any stick with universal spline end. Product Number: GRAB-IT-1

GRAB-IT Overhead Fuse Barrel Installation and Removal Tool

 Rated for 100 Amp and 200 Amp overhead fuse barrels. Provides easy and safe removal and installation of overhead fuse barrels. Mounts on any stick with universal spline end. Product Number: GRAB-IT-2

GRAB-IT Overhead Fuse Barrel Installation and Removal Tool

 Rated for SMU-20 overhead fuse barrels. Provides easy and safe removal and installation of overhead fuse barrels. Mounts on any stick with universal spline end. Product Number: GRAB-IT-3

Klondike Clamp

 Special clamp designed to secure insulating blanket around pole easily and quickly without damaging the blanket. Product Number: USCP-001

Klondike Clamp - Large

 Special clamp designed to secure insulating blanket around large diameter poles easily and quickly without damaging the blanket. Product Number: USCP-002

Jumper Hook

 "C" shaped hanger designed to slip over line hose and provide a safe/easy means to prevent energized jumper leads from sagging and cause a potentially dangerous cross-phase situation. Product Number: USJH-001

Bucket-Mate Polymeric Hook For Bucket Storage

 Bucket-Mate polymeric hook for bucket use. Made of a special polymer this hook will NOT break like all other available hook products. Retains it's mechanical strength even in cold weather! Product Number: USBM-004

Jumper-T 001

 Insulated overhead T bracket for grounding leads or jumper leads. Rated for 300 Amp continuous service and up to 34.5 kV applications. Product Number: USJT-001

Jumper-T 002

 Insulated overhead T bracket for grounding leads or jumper leads. Rated for 300 amp continuous service and up to 34.5 kV applications. Incorporates both horizontal and vertical working sides. Product Number: USJT-002

Fuse-Safe

 Portable current limiting fuse protection for additional protection when working on overhead distribution systems. Designed to work with any size current limiting fuse. Fitted with duckbill top clamp and bottom parking stand. Current limiting fuse to be supplied by the customer. Product Number: USFS-001

Conductor Cleaning Brushes Only - For USCC-001

 750-250 MCM range replacement brushes for USCC-001 Product Number: USCC-002

Conductor Cleaning Brushes Only - For USCC-001

 250 MCM - #4 range replacement brushes for USCC-001 Product Number: USCC-003

Large Conductor Cleaning Brush - Sub-Station Type

 Large capacity conduit cleaner for substation applications. Works on conduit ranging from 3" diameter minimum to 11" maximum. Fully shotgun stick operable. Product Number: USCC-004

Conductor Cleaning Brushes Only - For USCC-004

 Replacement brush set for USCC-004 Large Conductor Cleaner Product Number: USCC-005

Conductor Cleaning Brushes Only - For USCC-006

 Replacement brush set for USCC-006 mid-sized conductor cleaner. Product Number: USCC-007

Mid-Range Conductor Cleaning Brush

 Mid-range conductor cleaner - conductor range from 3/4" diameter minimum through 3" diameter maximum. Unit fully shotgun stick operable. Product Number: USCC-006