Jumper-T 001
Product Number: USJT-001

ENLARGE
Please contact your local Sales Rep or call the factory to place your order (828) 323-8914 We accept VISA / MC / AMEX.
Product Dimensions: 26 1/2" height x 12" width
Product Weight: 3 lb.

The Jumper-T is a versatile tool whenever using jumper leads or grounding leads. No need to purchase and or manipulate long lengths of heavy bulky cable. Simply use the Jumper T to splice shorter lines which are easier to handle.

Each working side of the T is made from 5/8" diameter aluminum rod 6" in length for easy jumper head connection. Both ends incorporate an end knob to prevent the head from accidentally slipping off.

The Jumper-T incorporates over 10" of electrical rated high strength fiberglass to provide up to 34.5 kV operations. The aluminum T bar is sized to permit up to 300 Amp service applications.
The duckbill top clamp will work on conductor sizes ranging from #6 solid copper (0.16" diameter) minimum to 1033 MCM (1.25" diameter) maximum.

If you require a special top clamp please call the factory. We may be able to modify the Jumper-T to meet your specific needs.




related products

15 kV Jack Jumper

 Jack Jumper overhead cutout bypass jumper. Designed for use on all standard 15 kV rated cutouts. Rated for 100 Amp service. Exhibits a maximum stretch of 9 1/2". Product Number: USJJ-001

27 kV Jack Jumper

 Jack Jumper overhead cutout bypass jumper. Designed for use on all standard 27 kV rated cutouts. Rated for 100 Amp service. Exhibits a maximum stretch of 14 1/2". Product Number: USJJ-002

15 kV Loadbreak Jack Jumper

 JackJumper overhead cutout bypass jumper. Designed for use on ABB's 15 kV rated porcelain loadbreak cutouts (cutouts with elephant ears). Rated for 100 Amp service. Product Number: USJJ-004

38 kV Cutout & SMD-20 15 kV Jack Jumper

 Jack Jumper overhead cutout bypass jumper. Designed for use on all standard 38 kV rated cutouts and SMD-20 15 kV power fuses. Rated for 100 Amp service. Exhibits a maximum stretch of 19" Product Number: USJJ-005

SMD-20 38 kV Jack Jumper

 Jack Jumper overhead cutout bypass jumper. Designed for use on SMD-20 38 kV power fuses incorporating a "V" design. Rated for 100 Amp service. Exhibits a maximum stretch of 40". Product Number: USJJ-007

GRAB-IT Overhead Fuse Barrel Installation and Removal Tool

 Rated for 100 Amp overhead fuse barrels. Provides easy and safe removal and installation of overhead fuse barrels. Mounts on any stick with universal spline end. Product Number: GRAB-IT-1

GRAB-IT Overhead Fuse Barrel Installation and Removal Tool

 Rated for 100 Amp and 200 Amp overhead fuse barrels. Provides easy and safe removal and installation of overhead fuse barrels. Mounts on any stick with universal spline end. Product Number: GRAB-IT-2

GRAB-IT Overhead Fuse Barrel Installation and Removal Tool

 Rated for SMU-20 overhead fuse barrels. Provides easy and safe removal and installation of overhead fuse barrels. Mounts on any stick with universal spline end. Product Number: GRAB-IT-3

Klondike Clamp

 Special clamp designed to secure insulating blanket around pole easily and quickly without damaging the blanket. Product Number: USCP-001

Klondike Clamp - Large

 Special clamp designed to secure insulating blanket around large diameter poles easily and quickly without damaging the blanket. Product Number: USCP-002

Jumper Hook

 "C" shaped hanger designed to slip over line hose and provide a safe/easy means to prevent energized jumper leads from sagging and cause a potentially dangerous cross-phase situation. Product Number: USJH-001

Bucket-Mate Polymeric Hook For Bucket Storage

 Bucket-Mate polymeric hook for bucket use. Made of a special polymer this hook will NOT break like all other available hook products. Retains it's mechanical strength even in cold weather! Product Number: USBM-004

Jumper-T 002

 Insulated overhead T bracket for grounding leads or jumper leads. Rated for 300 amp continuous service and up to 34.5 kV applications. Incorporates both horizontal and vertical working sides. Product Number: USJT-002

Fuse-Safe

 Portable current limiting fuse protection for additional protection when working on overhead distribution systems. Designed to work with any size current limiting fuse. Fitted with duckbill top clamp and bottom parking stand. Current limiting fuse to be supplied by the customer. Product Number: USFS-001

Small Conductor Cleaning Brush

 Overhead conductor cleaning tool - #4 conductor through 750 MCM conductor. Hand or shotgun stick operable. Product Number: USCC-001

Conductor Cleaning Brushes Only - For USCC-001

 750-250 MCM range replacement brushes for USCC-001 Product Number: USCC-002

Conductor Cleaning Brushes Only - For USCC-001

 250 MCM - #4 range replacement brushes for USCC-001 Product Number: USCC-003

Large Conductor Cleaning Brush - Sub-Station Type

 Large capacity conduit cleaner for substation applications. Works on conduit ranging from 3" diameter minimum to 11" maximum. Fully shotgun stick operable. Product Number: USCC-004

Conductor Cleaning Brushes Only - For USCC-004

 Replacement brush set for USCC-004 Large Conductor Cleaner Product Number: USCC-005

Conductor Cleaning Brushes Only - For USCC-006

 Replacement brush set for USCC-006 mid-sized conductor cleaner. Product Number: USCC-007

Mid-Range Conductor Cleaning Brush

 Mid-range conductor cleaner - conductor range from 3/4" diameter minimum through 3" diameter maximum. Unit fully shotgun stick operable. Product Number: USCC-006